Point Cloud Library (PCL)  1.9.1-dev
ON_Extrusion Member List

This is the complete list of members for ON_Extrusion, including all inherited members.

AddInnerProfile(ON_Curve *inner_profile)ON_Extrusion
AttachUserData(ON_UserData *pUserData)ON_Object
BoundingBox() constON_Geometry
BrepForm(ON_Brep *brep=NULL) constON_Extrusionvirtual
BrepForm(ON_Brep *brep, bool bSmoothFaces) constON_Extrusion
CapCount() constON_Extrusion
CleanupPolyCurveProfile(ON_PolyCurve &polycurve)ON_Extrusionstatic
ClearBoundingBox()ON_Geometryvirtual
ComponentIndex() constON_Geometryvirtual
CopyFrom(const ON_Object *src)ON_Object
CopyUserData(const ON_Object &source_object)ON_Object
CreateFrom3dCurve(const ON_Curve &curve, const ON_Plane *plane, double height, bool bCap, ON_Extrusion *extrusion=0)ON_Extrusionstatic
Cylinder(const ON_Cylinder &cylinder, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)ON_Extrusionstatic
DataCRC(ON__UINT32 current_remainder) constON_Extrusionvirtual
Degree(int dir) constON_Extrusionvirtual
Destroy()ON_Extrusion
DestroyRuntimeCache(bool bDelete=true)ON_Surfacevirtual
DestroySurfaceTree()ON_Surface
DetachUserData(ON_UserData *pUserData)ON_Object
Dimension() constON_Extrusionvirtual
Domain(int dir) constON_Extrusionvirtual
Dump(ON_TextLog &) constON_Extrusionvirtual
DuplicateSurface() constON_Surfacevirtual
E_iso enum valueON_Surface
EmergencyDestroy()ON_Object
Ev1Der(double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, int quadrant=0, int *hint=0) constON_Surface
Ev2Der(double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &duu, ON_3dVector &duv, ON_3dVector &dvv, int quadrant=0, int *hint=0) constON_Surface
Evaluate(double u, double v, int num_der, int array_stride, double *der_array, int quadrant=0, int *hint=0) constON_Extrusionvirtual
EvaluatePoint(const class ON_ObjRef &objref, ON_3dPoint &P) constON_Surfacevirtual
EvNormal(double u, double v, ON_3dPoint &point, ON_3dVector &normal, int quadrant=0, int *hint=0) constON_Surface
EvNormal(double u, double v, ON_3dVector &normal, int quadrant=0, int *hint=0) constON_Surface
EvNormal(double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &normal, int=0, int *=0) constON_Surface
EvPoint(double u, double v, ON_3dPoint &point, int quadrant=0, int *hint=0) constON_Surface
Extend(int dir, const ON_Interval &domain)ON_Extrusionvirtual
FaceCount() constON_Extrusion
FirstUserData() constON_Object
FrameAt(double u, double v, ON_Plane &frame) constON_Surface
GetBBox(double *boxmin, double *boxmax, int bGrowBox=false) constON_Extrusionvirtual
GetBoundingBox(ON_BoundingBox &bbox, int bGrowBox=false) constON_Geometry
GetBoundingBox(ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) constON_Geometry
GetBrepFormComponentIndex(ON_COMPONENT_INDEX extrusion_ci, ON_COMPONENT_INDEX &brep_ci) constON_Extrusion
GetBrepFormComponentIndex(ON_COMPONENT_INDEX extrusion_ci, double extrusion_profile_parameter, const ON_Brep &brep_form, ON_COMPONENT_INDEX &brep_ci) constON_Extrusion
GetClosestPoint(const ON_3dPoint &P, double *s, double *t, double maximum_distance=0.0, const ON_Interval *sdomain=0, const ON_Interval *tdomain=0) constON_Extrusion
GetDomain(int dir, double *t0, double *t1) constON_Surface
GetLocalClosestPoint(const ON_3dPoint &, double, double, double *, double *, const ON_Interval *=NULL, const ON_Interval *=NULL) constON_Extrusion
GetMiterPlaneNormal(int end, ON_3dVector &N) constON_Extrusion
GetNextDiscontinuity(int dir, ON::continuity c, double t0, double t1, double *t, int *hint=NULL, int *dtype=NULL, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) constON_Extrusionvirtual
GetNurbForm(ON_NurbsSurface &nurbs_surface, double tolerance=0.0) constON_Extrusionvirtual
GetNurbFormParameterFromSurfaceParameter(double surface_s, double surface_t, double *nurbs_s, double *nurbs_t) constON_Extrusionvirtual
GetParameterTolerance(int dir, double t, double *tminus, double *tplus) constON_Extrusionvirtual
GetPathPlane(double s, ON_Plane &plane) constON_Extrusion
GetProfileCurves(ON_SimpleArray< const ON_Curve *> &profile_curves) constON_Extrusion
GetProfileKinkParameters(int profile_index, ON_SimpleArray< double > &profile_kink_parameters) constON_Extrusion
GetProfilePlane(double s, ON_Plane &plane) constON_Extrusion
GetProfileTransformation(double s, ON_Xform &xform) constON_Extrusion
GetSpanVector(int dir, double *span_vector) constON_Extrusionvirtual
GetSpanVectorIndex(int dir, double t, int side, int *span_vector_index, ON_Interval *span_interval) constON_Extrusionvirtual
GetSurfaceParameterFromNurbFormParameter(double nurbs_s, double nurbs_t, double *surface_s, double *surface_t) constON_Extrusionvirtual
GetSurfaceSize(double *width, double *height) constON_Extrusionvirtual
GetTightBoundingBox(ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) constON_Extrusionvirtual
GetUserData(const ON_UUID &userdata_uuid) constON_Object
GetUserString(const wchar_t *key, ON_wString &string_value) constON_Object
GetUserStringKeys(ON_ClassArray< ON_wString > &user_string_keys) constON_Object
GetUserStrings(ON_ClassArray< ON_UserString > &user_strings) constON_Object
HasBrepForm() constON_Surfacevirtual
HasNurbForm() constON_Extrusionvirtual
IsAtSeam(double s, double t) constON_Surface
IsAtSingularity(double s, double t, bool bExact=true) constON_Surface
IsCapped() constON_Extrusion
IsClosed(int) constON_Extrusionvirtual
IsCone(ON_Cone *cone=NULL, double tolerance=ON_ZERO_TOLERANCE) constON_Surface
IsContinuous(ON::continuity c, double s, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) constON_Extrusionvirtual
IsCylinder(ON_Cylinder *cylinder=NULL, double tolerance=ON_ZERO_TOLERANCE) constON_Surface
IsDeformable() constON_Geometryvirtual
IsIsoparametric(const ON_Curve &curve, const ON_Interval *curve_domain=NULL) constON_Extrusionvirtual
IsIsoparametric(const ON_BoundingBox &bbox) constON_Extrusionvirtual
IsKindOf(const ON_ClassId *pClassId) constON_Object
IsMitered() constON_Extrusion
ISO enum nameON_Surface
iso_count enum valueON_Surface
IsoCurve(int dir, double c) constON_Extrusionvirtual
IsPeriodic(int) constON_Extrusionvirtual
IsPlanar(ON_Plane *plane=NULL, double tolerance=ON_ZERO_TOLERANCE) constON_Extrusionvirtual
IsSingular(int) constON_Surfacevirtual
IsSolid() constON_Extrusion
IsSphere(ON_Sphere *sphere=NULL, double tolerance=ON_ZERO_TOLERANCE) constON_Surface
IsTorus(ON_Torus *torus=NULL, double tolerance=ON_ZERO_TOLERANCE) constON_Surface
IsValid(ON_TextLog *text_log=NULL) constON_Extrusionvirtual
IsValidPolyCurveProfile(const ON_PolyCurve &polycurve, ON_TextLog *text_log=0)ON_Extrusionstatic
m_bCapON_Extrusion
m_bHaveNON_Extrusion
m_bTransposedON_Extrusion
m_NON_Extrusion
m_Nz_minON_Extrusionstatic
m_pathON_Extrusion
m_path_domainON_Extrusion
m_path_length_minON_Extrusionstatic
m_profileON_Extrusion
m_profile_countON_Extrusion
m_tON_Extrusion
m_upON_Extrusion
MakeDeformable()ON_Geometryvirtual
MemoryRelocate()ON_Objectvirtual
ModelObjectId() constON_Objectvirtual
MoveUserData(ON_Object &source_object)ON_Object
N_iso enum valueON_Surface
NormalAt(double, double) constON_Surface
not_iso enum valueON_Surface
NurbsSurface(ON_NurbsSurface *pNurbsSurface=NULL, double tolerance=0.0, const ON_Interval *s_subdomain=NULL, const ON_Interval *t_subdomain=NULL) constON_Surface
ObjectType() constON_Extrusionvirtual
ON_Extrusion()ON_Extrusion
ON_Extrusion(const ON_Extrusion &src)ON_Extrusion
ON_Geometry()ON_Geometry
ON_Geometry(const ON_Geometry &)ON_Geometry
ON_Object()ON_Object
ON_Object(const ON_Object &)ON_Object
ON_Surface()ON_Surface
ON_Surface(const ON_Surface &)ON_Surface
operator=(const ON_Extrusion &)ON_Extrusion
ON_Surface::operator=(const ON_Surface &)ON_Surface
ON_Geometry::operator=(const ON_Geometry &)ON_Geometry
ON_Object::operator=(const ON_Object &)ON_Object
PathEnd() constON_Extrusion
PathLineCurve(ON_LineCurve *line_curve) constON_Extrusion
PathParameter() constON_Extrusion
PathStart() constON_Extrusion
PathTangent() constON_Extrusion
Pipe(const ON_Cylinder &cylinder, double other_radius, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)ON_Extrusionstatic
PointAt(double, double) constON_Surface
PolyProfile() constON_Extrusion
Profile(int profile_index) constON_Extrusion
Profile3d(int profile_index, double s) constON_Extrusion
Profile3d(ON_COMPONENT_INDEX ci) constON_Extrusion
ProfileCount() constON_Extrusion
ProfileIndex(double profile_parameter) constON_Extrusion
ProfileIsKinked(int profile_index) constON_Extrusion
ProfileParameter() constON_Extrusion
ProfileSmoothSegmentCount(int profile_index) constON_Extrusion
PurgeUserData()ON_Object
Read(ON_BinaryArchive &binary_archive)ON_Extrusionvirtual
Reverse(int dir)ON_Extrusionvirtual
Rotate(double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)ON_Geometry
Rotate(double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)ON_Geometry
S_iso enum valueON_Surface
Scale(double scale_factor)ON_Geometry
SetDomain(int dir, double t0, double t1)ON_Extrusionvirtual
ON_Surface::SetDomain(int dir, ON_Interval domain)ON_Surface
SetMiterPlaneNormal(ON_3dVector N, int end)ON_Extrusion
SetOuterProfile(ON_Curve *outer_profile, bool bCap)ON_Extrusion
SetPath(ON_3dPoint A, ON_3dPoint B)ON_Extrusion
SetPathAndUp(ON_3dPoint A, ON_3dPoint B, ON_3dVector up)ON_Extrusion
SetUserString(const wchar_t *key, const wchar_t *string_value)ON_Object
SetUserStrings(int count, const ON_UserString *user_strings, bool bReplace)ON_Object
SizeOf() constON_Extrusionvirtual
SpanCount(int dir) constON_Extrusionvirtual
Split(int dir, double c, ON_Surface *&west_or_south_side, ON_Surface *&east_or_north_side) constON_Extrusionvirtual
SumSurfaceForm(ON_SumSurface *sum_surface) constON_Extrusion
SwapCoordinates(int i, int j)ON_Geometryvirtual
Transform(const ON_Xform &xform)ON_Extrusionvirtual
TransformUserData(const ON_Xform &xform)ON_Object
Translate(const ON_3dVector &translation_vector)ON_Geometry
Transpose()ON_Extrusionvirtual
Trim(int dir, const ON_Interval &domain)ON_Extrusionvirtual
UserStringCount() constON_Object
W_iso enum valueON_Surface
WallEdge(ON_COMPONENT_INDEX ci) constON_Extrusion
WallSurface(ON_COMPONENT_INDEX ci) constON_Extrusion
Write(ON_BinaryArchive &binary_archive) constON_Extrusionvirtual
x_iso enum valueON_Surface
y_iso enum valueON_Surface
~ON_Extrusion()ON_Extrusion
~ON_Geometry()ON_Geometryvirtual
~ON_Object()ON_Objectvirtual
~ON_Surface()ON_Surfacevirtual